Filter By:
- BMX (4)
- Bottom Brackets (11)
- Brakes/Levers/Pads (64)
- Cables (31)
- Cassettes/Freewheels (19)
- Chainrings (13)
- Chains (30)
- Cranksets (16)
- Show More Categories
- Derailleurs (20)
- Forks (1)
- Handlebar Grips/Tape (32)
- Handlebars (1)
- Headsets (13)
- Pedals (33)
- Saddles (25)
- Seatposts (8)
- Shift/Brake Combinations (4)
- Shifters (7)
- Stems (25)
- Other (78)
- Show Fewer Categories
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Parts

$24.99
- For use with lightweight disc rotors with cutout sections around the bolt area
- Disc rotor reinforcing ring supports the 6 rotor bolt mounting positions. This support effectively ties them together to work as a unit
- IS: 6-bolt / 44mm BCD International Standard
- Sold in pairs

$19.99 - $27.00
To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

$29.99
To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

$44.00
Need a replacement line for your Avid hydraulic disc brakes? You're covered with Avid's Hydraulic Line Kit. It's got 2000mm of hose for front or rear application, and all the fittings to work with your brakes.

$44.99
Smooth, controlled braking is yours with Avid's G2 CleanSweep Rotor. It utilizes cross-drilled technology to dissipate heat and cut weight, giving you a consistent feel at the lever and predictable speed control in all conditions.

$61.00
The industry standard cable-actuated disc brake since its introduction is still popular due to smooth ball bearing operation and ease of installation and maintenance.
- All calipers have 74mm mounting bolt spacing
- For use with long cable-pull levers
- Pad retraction and spring tension are adjustable
- Includes steel-backed sintered pads
- Brake Caliper Type: Post Mount
- Brake Lever Actuation: Long Pull
- Hub/Disc Compatibility: 6-Bolt
- Rotor Included: No

$8.00
- Teflon-coated stainless steel inner wire
- Includes cable, housing, ferrules, and cable tips
- Cable length: 2100mm
- Housing length: 1800mm
- Use: Front or Rear
- Length: 2100mm
- Diameter: 1.5mm
- Style: BMX/MTB

$12.00
- Upper cables measured from brake lever to detangler top plate
- Lower cables are measured from detangler to cable stop/London mod
- Includes adjusters compatible with most detangler styles
- Use: Lower
- Length: Fits most
- Diameter: 1.5mm

$12.99
- A comfortable and timeless ribbed style grip suitable for BMX and cruiser use
- High flange BMX style design with black press-in end plugs
- Length: 145mm

$14.99
- Designed for linear pull & mechanical disc brakes
- Aluminum construction
- 2.5 finger
- 22.2mm (7/8-inch) clamp
- Left/Right: Right
- Reach adjust and return spring
- 88g each

$24.99
Constructed of 6061-T6 aluminum and featuring a 4-bolt face clamp, the Piston BMX threadless stem offers reliability at a great value.

$89.99
- 11-Speed brake & shift cable/housing set
- Special 4.1mm derailleur housing for reduced friction
- Everything you need for a Campy-equipped bike in one simple kit
- Fits all Campagnolo Ultra-Shift, Power-Shift, Ergopower, Time Trial and Flat bar systems
- Includes 4 cables, housing & ferrules
- Cable Head: Road
- Diameter: 1.2 mm
- End Type: Campy
- Housing Diameter: 4.1 mm

$89.99
Campagnolo's Record 11-Speed Chain is the right choice for Campagnolo 11-speed drivetrains. This fine chain is engineered for excellent strength, long wear and brilliant shifting thanks to a unidirectional design and an anti-friction treatment that lets it glide across your cassette. It also boasts hollow pins to keep your bicycle as light as possible.

$2.99
Shim spacers can be placed between bearing and compression cover in IS headsets to fine tune the fitment.

$10.00
Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters.
- Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series
- Integral mold seals keep out the elements
- Durable steel construction

$24.00
Hellbender bearings have an improved seal structure and are cross compatible with Cane Creek headsets.

$25.00
Cane Creek's Aheadset is a simple, affordable solution for your headset needs.
• Bearing Type: Cup and Cone
• Color: Black
• Crown Race: 30
• Defined Color: Black
• Lower Stack Height: 12 mm
• S.H.I.S Lower: EC34
• S.H.I.S Upper: EC34
• S.H.I.S. Stem Clamp Diameter: 28.6-26tpi Quill
• Upper Stack Height: 22 mm
• Weight: 205 g

$29.99
Cane Creek's Aheadset is a simple, affordable solution for your headset needs.
• Bearing Type: Cup and Cone
• Color: Black
• Crown Race: 30
• Defined Color: Black
• Lower Stack Height: 12 mm
• S.H.I.S Lower: EC34
• S.H.I.S Upper: EC34
• S.H.I.S. Stem Clamp Diameter: 28.6
• Upper Stack Height: 18 mm
• Weight: 165 g

$30.00
Cane Creek's Aheadset is a simple, affordable solution for your headset needs.
• Bearing Type: Cup and Cone
• Color: Black
• Crown Race: 26
• Defined Color: Black
• Lower Stack Height: 12 mm
• S.H.I.S Lower: EC30
• S.H.I.S Upper: EC30
• S.H.I.S. Stem Clamp Diameter: 25.4-24tpi Quill
• Upper Stack Height: 22 mm
• Weight: 205 g

$34.99
Cane Creek's Aheadset is a simple, affordable solution for your headset needs.
• Bearing Type: Cartridge
• Color: Black
• Crown Race: 30
• Defined Color: Black
• Lower Stack Height: 2 mm
• S.H.I.S Lower: IS41
• S.H.I.S Upper: IS41
• S.H.I.S. Stem Clamp Diameter: 28.6
• Upper Stack Height: 7 mm
• Weight: 65 g

$49.00
• Replacement stainless steel cartridge bearings for Cane Creek 110 headsets
• 38mm, 41mm, and 42mm are sold in pairs
• 52mm sold individually

$74.00
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 40-Series headsets.
• Technical Description: ZS44/28.6/H8/K|ZS56/40/H4/K
• Top Type: ZS - ZeroStack
• Top Head Tube Inside Dia.: 44.00mm
• Stem Clamp Dia.: 28.6mm
• Top Stack Height: 8mm
• Top Bearing Type: Black Oxide, Sealed
• Bottom Type: ZS - ZeroStack
• Bottom Head Tube Inside Dia.: 55.95mm
• Crown Race Seat Dia.: 39.79mm
• Crown Race Type: Steel, Face-Sealed
• Bottom Stack Height: 4mm
• Bottom Bearing Type: Black Oxide, Sealed
• Material: 6061 aluminum
• Weight: 109g

$19.99
These baseplates are the foundation that keeps Chris King headsets turning with legendary smoothness. Manufactured from high-quality stainless steel or titanium, Chris King makes replacement baseplates for all standard sizes and a number of ingenious solutions for those that need something a little special to make their headset work.
- Engineered and manufactured in Portland, Oregon USA
- High-quality stainless steel and titanium baseplates available for all standard Chris King headset sizes
- Titanium baseplates are available in 1-inch and 1 1/8-inch sizes only
- Devolution baseplates are a stainless steel solution that allow King headsets to adapt to a wide variety of steerer tube sizes
- King Stainless Steel baseplates are available in undersized and oversized versions for irregular steerer tube sizes

$26.99
Crank Brothers' Premium MTB Cleats are perfect for your Crank Brothers Eggbeater, Candy, Acid, Smarty, Mallet, and Quattro pedals. They're made from solid brass for crisp entry and exit, and top-notch durability.

$69.99
Crank Brothers' most versatile pedal. The Candy excels at it all – cyclocross, XC, trail, all mountain. 4-sided entry enables superior mud-shedding capability, and customizable float and release angles create a dialed-in feel.
- Spindle material: Forged scm 435 chromoly steel
- Body material: One piece composite
- Wing material: Stamped steel
- Spring material: 300 series stainless steel
- Release angle: 15° / 20°
- Q-factor: 52mm
- Inner bearing type: Igus LL-glide bearing
- Outer bearing type: Enduro cartridge bearing
- Cleat: Premium brass cleats with shims included
- Weight: 294g per pair
- Warranty: 5 years

$15.99
- Special microcellular structured tape material is waterproof and conforms to bar shapes
- High elastic modulus provides vibration-damping and comfort
- Embossed logo throughout tape length and self-adhesive backing
- Black plastic end plugs and finishing strips

$24.99
Dimension Two-Bolt Seatposts provide a sturdy and durable saddle perch for cross country and all-mountain riding in three diameters, rigorously tested to ISO 4210 Mountain standards.
- Constructed with AL-6061-T6 aluminum
- Shot-peened finish
- 0mm offset

$34.99
Dimension 25.4 Stem is a fully forged 6061-T6 aluminum stem with 4-bolt handlebar clamp.
- 2-D forged AL-6061-T6
- Four-bolt handlebar clamp
- 41mm height
- Dimension stems are not intended for use with carbon handlebars or carbon steerer tubes
- Weight: 130g-180g

$34.99
Dimension 26.0 Stems
- Dimension stems are not intended for use with carbon handlebars or carbon steer tubes
- Fully forged AL-6061-T6
- 4-bolt handlebar clamp
- Weight: 140g-180g

$34.99 - $39.99
Dimension 31.8 Stems are fully forged 6061-T6 aluminum stems that have a 4-bolt handlebar clamp.
- 31.8mm can be used with 26.0 bars with additional shim (SM5317)
- Dimension stems are not intended for use with carbon handlebars or carbon steer tubes
- Weight: 130g-180g

$34.99
Dimension cassettes feature Shimano/SRAM compatible spacing, precise fitment for crisp shifting, and easy installation with standard tools. They're a perfect replacement for worn out cogs. Constructed of steel cogs and lock ring.
Cassette Cogs:
- 11 – 28T: 11-13-15-18-21-24-28
- 12 – 28T: 12-14-16-18-21-24-28
- 12 – 32T: 12-13-15-18-21-24-32

$34.99
Dimension Combo Pedal Sets are assembled with size large toe clips, straps and reflectors.
- Pedal Body Material: Aluminum
- Pedal Spindle: 9/16-inch
- Pedal Type: Toe Clip Compatible
- Spindle Material: Chromoly Steel
- Weight: 520g

$34.99 - $39.99
For cross country and all-mountain riding, Dimension Trail Stems provide a broad array of sizing options, rigorously tested to ISO 4210 Mountain standards.
- Constructed with AL-6061-T6 aluminum
- Shot-peened finish
- Dimension stems are not intended for use with carbon handlebars or carbon steerer tubes

$19.99
- Lightweight silicone grips that conform to your hand for maximum grip and shock absorption to reduce hand fatigue and arm pump
- UV resistant and non-porous, they will not fade or harden
- Non-slip grip compound that stays put even when wet
- Fit XC: 13

$39.99
Easton's EA50 Seatpost is rugged, reliable and perfect for all your cycling adventures. It's made from 2014-aluminum with Easton's TaperWall technology that controls the post's internal thickness, adding material where you need it and none where you don't. It provides excellent strength and durability while keeping the weight low. Plus, the EA50 boasts an easy-to-use 2-bolt clamp for secure seat adjustments.

$94.99
Upgrade your ride with the gram-shaving EA90 stem from Easton. This ultra-light bar-holder sports Easton's 3D forged aluminum to provide a great balance of low weight, high strength and stiffness for excellent steering control in all conditions. Easton's Top-Lock technology locks the stem and faceplate together, allowing for a highly rigid interface while minimizing loads on the bolts so the EA90 is perfectly safe for carbon bars.

$210.99
Easton's EC90 Seatpost is super light and amazingly strong. It's crafted from Easton's high-tech carbon for maximum stiffness and a premium ride. Plus, it even features carbon clamping pieces for the ultimate in lightness, while Easton's Relief-Area Design (RAD) enhances strength where the frame clamps the post.

$399.99
The EC90 SL crank arms utilize the RaceFace CINCH technology which allows for direct mount 1x rings as well as direct mount 2x spiders, providing industry-leading versatility and peloton-leading performance.
- Hollow carbon construction paired with highest grade aluminum pedal insert and spindle
- Bottom Bracket sold separately
- CINCH removable spiders and direct mount rings utilize a 20-tooth ISIS BB tool for removal and installation
- CINCH interface with road specific 30mm spindle
- Road standard Q-Factor of 149mm; will fit every major road BB standard
- Weight: 352g

$18.99
- Fits Terra Sport 5 and 6 pedal models
- Steel construction
- SPD style cleat
- Single release function
- Hardware included

$21.99
- Compatible with all Shimano SPD type pedals
- 4 degrees of float
- Sold in pairs with hardware
- Compatible with Multisport 4 pedal

$79.99
- Made of 6061-T6 alloy
- Extruded fastener parts
- Internal Diameter: 19.6mm
- With 26.0mm shims

$7.99
Channel your inner flower child with Electra's Daisy Grips. With their cheerful colors and stitched details, the Daisy Grips are sure to brighten your day with their unique appearance and casual comfort. And, they're easy to install, which means you can start enjoying the soft squish of these grips immediately!

$7.99 - $19.99
Electra's Ergo Grips feature supportive curves and cool stitching. With these stylish grips on your favorite rig, your hands will stay comfortable all ride long.

$29.99
Ergon's GA2 Fat is for riders with large hands or high demands for damping, offering extra thick circumference. The ergonomically optimized form allows reduced force while gripping, because the grip zones are matched to the hand, allowing greater control on demanding trails. The inner construction varies in thickness allowing for greater damping without loss of control. The GA2 Fat has a superb tactile feel, and the super soft, UV-stable rubber compound is exclusively manufactured in Germany for Ergon. The inboard aluminum clamp holds grips securely, allows even more grip area at the end of the bars, and makes these grips carbon-bar friendly.

$29.99
The original ergonomic grip – continually improved over the last few years. As the worldwide standard in ergonomic function, materials and quality, the GP1 has a new internal structure. More comfort is ensured by the three-part internal support platform with varying wall thickness. German-made rubber compound is of the purest quality. Forged aluminium clamps, unlike the pressed clamps preferred by the copies.

$29.99 - $34.99
- 3D forged alloy construction
- Fits 1-1/8-inch (28.6mm) steerer forks
- Fits 31.8mm handlebar clamp
- Heat treated hardware
- Weight: 152g (100mm)

$29.99
- 3D forged alloy construction
- Fits 1-1/8-inch (28.6mm) steerer forks
- Fits 25.4mm handlebar clamp
- M6 Black hardware
- Weight: 161g (110mm)

$34.99
Evo's MX-6 Pedals are the classic platforms. Tough enough for downhill use, casual enough for your city bike. They use standard 9/16-inch threads.

$19.99
- Shimano SPD-SL-style
- Engineered thermoplastic injection body
- Anti-slip walk pads
- Fixed position with no float

$15.99
This is an FSA MegaExo Crank Arm Bolt for 24mm MegaExo alloy cranks
- Designed to fit alloy FSA cranks only
- Includes M17 bolt, M27 self-extracting cap, and washers

$29.99 - $59.99
FSA Super Road Chainrings are designed to provide flawless shifting, with minimal weight and unmatched durability.
- Precision CNC machined AL7075/T6
- Shifting ramps and stainless steel pins on outer rings
- 110mm asymmetric (ABS)
- Black anodized with CNC silver
- Laser etched logo
- Compatible only with Gossamer ABS cranks
- Will not properly fit K-Force or SL-K cranksets

$43.99
Dial in your perfect bike fit with FSA's Omega Stem. 3D-forged and CNC machined construction makes this stem stiff and light for power transfer and steering precision. The four-bolt faceplate holds bars securely, and this stem features stainless steel bolt hardware.

$55.99
FSA's Energy Seatpost features 3D-forged, CNC aluminum construction with a forged, high-strength aluminum seat clamp head. The one-bolt clamp offers simple, solid set up.
Page 1 of 8
Next page